2026 Commercial Budget Guidance

Commercial Concrete Grinding Prices Sydney

We assess commercial grinding and floor-preparation projects individually, from localised work to large, open warehouse and factory floors. The indicative rates below are business-to-business budget guidance in Australian dollars, excluding GST. Final pricing follows scope review, inspection or a test grind and depends on floor condition, access, removal, edge work, waste, power, programme and the required handover.

These rates are displayed only for commercial business customers and are indicative guide prices, not fixed quotations. Every displayed price excludes GST. The written quotation will show GST separately and the final GST-inclusive total. Difficult, unknown or multilayer surfaces may require an inspection or test grind before pricing is confirmed.
Section 1

VOLUME-BASED COMMERCIAL PRICING

Indicative volume rates exclude GST and apply to large, open commercial floors where access, floor condition, edge work, power, working hours, programme and the required handover profile support efficient production. Adhesive, coating, topping and heavy-removal work is priced separately.

Planned Preparation for Repeat Commercial Work

Clear scopes, coordinated access and repeat mobilisation can improve delivery efficiency. We assess each package against floor condition, removal requirements, edge work, power, waste and programme, then provide a written quotation for the agreed preparation and handover.

Contact us at admin@resinmeepoxy.com.au to discuss upcoming projects and preparation-only packages.

Large-Area Floor Preparation

Basic preparation grind
500–999 m²
$15–$25/m² ex GST
1,000–2,999 m²
$10–$18/m² ex GST
3,000–4,999 m²
$8–$15/m² ex GST
5,000 m² and above
Project-specific rate

Large-Area Flooring Systems

1,000 m² and above
Basic grind and preparation
$10–$18/m² ex GST
Basic two-coat epoxy
$45–$70/m² ex GST
Commercial full-flake system
$65–$95/m² ex GST
Heavy-duty commercial epoxy
$75–$115/m² ex GST
Grind-and-seal concrete
$50–$75/m² ex GST
Mechanically polished concrete
$85–$130+/m² ex GST

Large-project pricing assumes

Open, mostly unobstructed areas
Minimal hand grinding required
Continuous access to the floor
Standard working hours
Suitable machinery access
No heavy coating or adhesive removal
Small Commercial Projects

Individually Quoted

Localised preparation and smaller commercial projects are assessed on scope, mobilisation, location, equipment access, tooling, power, waste and working hours.

Your written quotation identifies mobilisation, preparation, dust extraction, labour, consumables and cleaning inclusions.

What May Be Included (Scope Dependent)

Professional concrete grinding
Industrial dust extraction
Accessible edge preparation where included
Materials specified for coating or polishing scopes
Installation only where included in the written quotation
Final vacuum cleaning
Written scope of work

Why Prices Can Change

Floor area and production sequence
Coating or adhesive thickness, layers and surface contamination
Concrete hardness and test-grind results
Required floor profile and handover standard
Edge work, cracks, repairs and tooling consumption
Restricted, rooftop or elevated access
Waste removal and disposal requirements
Available site power, water and generator requirements
Programme, working hours and trade sequencing
Section 2

CONCRETE GRINDING & FLOOR PREPARATION

Indicative rates exclude GST and depend on floor area, concrete hardness, material thickness, number of layers, access, edge work, tooling consumption, waste and the required handover profile.

Basic Grinding

Basic concrete preparation grind
$20–$35/m² ex GST
Heavy preparation or hard concrete
$30–$50/m² ex GST

Glue & Adhesive Removal

Light carpet glue removal
$18–$30/m² ex GST
Vinyl or carpet-tile glue removal
$30–$50/m² ex GST
Thick or multiple glue layers
$45–$70+/m² ex GST

Coating & Surface Removal

Paint or acrylic sealer removal
$22–$40/m² ex GST
Epoxy coating removal
$35–$65/m² ex GST
Tile glue or thinset removal
$30–$55/m² ex GST

Heavy & Specialist Removal

Waterproofing membrane removal
$50–$90+/m² ex GST
Screed or self-leveller removal
$55–$100+/m² ex GST
Stencil or spraycrete removal
$50–$100+/m² ex GST
Concrete levelling or high-spot removal
Inspection required

Rooftop Concrete Grinding & Waterproofing Preparation

Rooftop project price
Site Inspection Required
Rooftop and elevated concrete preparation is quoted after inspection because access, lifting requirements, existing membrane or coating, edges, penetrations, slab condition, weather exposure and waste handling can significantly affect the scope.
Written quotation
Rooftop membrane removal requires inspection, a written quotation and suitable weather conditions.
Accessible areas only
Section 3

POLISHED CONCRETE

Indicative polished-concrete and grind-and-seal rates exclude GST. Final pricing depends on slab condition, aggregate exposure, repairs, grout treatment, edge work, contamination, access and the specified sheen or grit level.

Budget Guidance

Warehouse Densify & Burnish

$25–$50/m² ex GST
Cleaned, densified and burnished without exposing large amounts of aggregate. Best for new concrete slabs.
Warehouses
Retail Spaces
Large Open Areas
Outdoor

Honed Concrete

$80–$120/m² ex GST
Lower-gloss concrete finish. Aggregate exposure, sealer and slip-performance requirements are specified for the location and intended use. Wet or outdoor suitability is assessed for each project.
Alfresco Areas
Pool Surrounds
Commercial Entrances

Grind & Seal

Polished appearance at a lower price than mechanical polish
Minimal exposure or cream finish
$55–$75/m² ex GST
Salt-and-pepper exposure
$65–$85/m² ex GST
Medium aggregate exposure
$75–$100/m² ex GST
Full aggregate exposure
$90–$130+/m² ex GST

Mechanically Polished Concrete

Progressive diamond tooling, densifier & polishing pads
Pricing assumes a sound slab with standard aggregate exposure. Full aggregate exposure, extensive grouting, repairs, difficult edges and contamination may increase the price.
400 grit — Matte or low sheen
$90–$115/m² ex GST
800 grit — Satin finish
$100–$140/m² ex GST
1500 grit — High gloss
$110–$155/m² ex GST
3000 grit — Premium high gloss
$125–$175+/m² ex GST
Section 4

EPOXY FLOORING

Indicative rates exclude GST and assume standard mechanical preparation of a suitable slab. Repairs, moisture-control systems, additional build, coving, line marking, difficult access and specialist chemical or slip-resistance requirements are priced separately.

Clear & Solid-Colour

Warehouses, workshops, factories
Clear sealer / dustproof
$35–$60/m² ex GST
Basic two-coat epoxy
$60–$85/m² ex GST
Solid-colour 100% solids epoxy
$70–$100/m² ex GST
Heavy-duty commercial epoxy
$90–$150/m² ex GST

Decorative Flake

Garages, showrooms, retail, amenities
Standard partial-flake
$70–$95/m² ex GST
Full-broadcast flake
$80–$110/m² ex GST
Premium flake + polyaspartic
$95–$130/m² ex GST
Premium with two clear topcoats
$110–$145/m² ex GST

Decorative & Heavy-Duty

Inspection required coats, thickness & site vary
Metallic epoxy
$120–$180/m² ex GST
Full Quartz-Broadcast Epoxy System
$100–$160/m² ex GST
Heavy-duty slip-resistant epoxy
$90–$150/m² ex GST
Epoxy mortar / resurfacing
$130–$220+/m² ex GST
Commercial kitchen epoxy
$90–$140+/m² ex GST
Section 5

COMMON ADDITIONAL WORK

Additional preparation, repair or access work may be required to achieve the specified substrate condition and trade handover standard.

Standard Additional Work

Minor crack repairs
$20–$45/lin. m ex GST
Additional/detail edge grinding
$25–$45/lin. m ex GST
Epoxy coving
$80–$120/lin. m ex GST
Additional slip-resistant finish
add $5–$15/m² ex GST

Specialty Additional Work

Heavy structural crack prep
Quoted after inspection
Heavy edge coating removal
$30–$55/lin. m ex GST
Moisture-barrier primer
add $15–$30/m² ex GST
Floor levelling
Quoted after inspection
Commercial Project Enquiries

SEND YOUR PLANS OR FLOOR SCOPE

Provide the site, approximate area, existing surface and required handover condition for project-specific pricing.