Concrete Grinding for Concreters Sydney
A specialist grinding partner for Sydney concreters and civil contractors. We assess rough finishes and localised high spots, and coordinate before the pour on slabs intended for mechanically exposed aggregate, honed or polished floors.
Service Overview
A Specialist Grinding Partner for Your Concrete Projects
Resin Me Epoxy works alongside concreters, civil contractors and builders across Sydney and Greater Sydney. Engage us to assess a poorly finished slab, reduce suitable high spots or plan the grinding for a new floor intended to expose aggregate. You deal directly with Filip Plesko on the scope, equipment, access and handover.
Commercial concrete grinding and preparation-only subcontract packages remain our core offer. We welcome suitable one-off projects and repeat trade work, with a strong focus on large, open floors and clearly agreed responsibilities.
Need a Rough or Poorly Finished Slab Assessed?
Rough finishing marks, trowel ridges and localised high areas may be suitable for controlled mechanical grinding. We assess the concrete, intended finish, level information and permitted removal before recommending the method. The aim is a practical surface outcome that supports the next stage of your project.
- Assessment of rough surfaces, raised finishing marks and localised high spots.
- Controlled grinding where the slab and required result allow it.
- Preparation for a nominated flooring or waterproofing system.
- Equipment and tooling selected for the concrete, access and removal task.
- Agreed edge work, cleaning and handover requirements.
Grinding removes concrete. It cannot fill depressions or correct every slab defect. Low sections, unsound concrete, structural concerns and specified floor tolerances may require additional assessment or a combination of methods. Where the result is uncertain, a representative test area helps establish what is achievable before the full scope is agreed.
Send slab photos for assessment. Include your company, site suburb, approximate area, slab age, intended finish, timing and any available level survey.
Work Together Before the Pour on Aggregate Floors
For a new slab intended for a mechanically exposed aggregate, honed or polished finish, involve RME before placement. Early coordination helps the concreter, grinding contractor and customer work towards the same finish specification.
- Appearance: the intended aggregate exposure, finish reference and sheen.
- Concrete and placement: mix, aggregate selection, placement, finishing and curing approach.
- Levels: finished heights, allowable removal and the grinding allowance.
- Scope: who places the slab, who grinds it, and who supplies the specified finished system.
- Programme: proposed pour date, appropriate curing, access and handover stages.
- Acceptance: a representative sample or test area where practical and clear review criteria.
Aggregate exposure and consistency depend on the concrete, its distribution, how the slab is placed and finished, and the material removed. We assess these factors and explain natural variation before agreeing the finish.
Mechanical Exposure and Washed Exposed Aggregate Are Different
Mechanical exposure uses diamond grinding on hardened concrete to reveal aggregate, followed by the specified honing, polishing or protective treatment. Washed exposed aggregate is produced during concreting by removing surface paste before it fully hardens. Tell us which finish the customer wants so the right process can be planned.
Explore mechanically polished concrete and aggregate-floor planning, or discuss a planned pour and finish.
Commercial Equipment and a Defined Handover
Our capability includes remote-controlled grinders, different machine sizes, multiple H-Class extraction units and active dust management. Independent power options are assessed against access, ventilation, equipment load and site requirements. See our equipment and mobilisation capability.
Right-first-time workmanship and a defect-free handover of our agreed scope are our quality objectives. We confirm the removal or finish requirements, review the work against that scope and identify any newly exposed issues before handover. Repairs, levelling, waste handling and finished-system installation are identified separately where applicable.
Relevant Project Examples
Our elevated slab grinding case study describes work for a concrete contractor on a weather-affected finish with high areas and rough sections. Our polished-concrete project examples show different agreed finishes. Each project is assessed on its own slab and specification.
Questions From Concreters
Can you grind out trowel marks or a rough finish?
Suitable raised marks, rough sections and high spots can sometimes be reduced by grinding. We assess soundness, required removal, levels and the intended finish first. Some marks or variations may remain visible.
Can you make the whole slab level?
Grinding reduces high concrete; it does not raise low sections. A nominated tolerance needs appropriate measurements and may require repairs, levelling or another method as well as grinding.
When should we involve you on an aggregate floor?
Before the pour, while the mix, finish, levels and responsibilities can still be coordinated. Send the plans, finish reference, intended use and proposed programme.
Can you guarantee the same aggregate exposure everywhere?
Exposure varies with aggregate distribution, placement, surface condition and removal depth. We discuss the achievable appearance and use a representative sample or test area where practical.
Can you prepare the slab for another flooring contractor?
Yes. We quote preparation-only packages and agree the removal, surface profile, edges, cleaning and handover with the responsible project team. The incoming installer remains responsible for its specified flooring system.
Do you take repeat subcontract work from concreters?
Yes. We welcome suitable repeat grinding and preparation packages. Each quotation accounts for the actual scope, access, mobilisation and programme.
Discuss a Slab or Plan the Next Pour
Send your company and contact details, site suburb, approximate m², slab photos or plans, required finish and timing. For an existing surface issue, include slab age, the affected areas and available level information. For a new aggregate floor, add the proposed pour date, mix details if available and a finish reference.
Request a concreter partnership or slab assessment, email admin@resinmeepoxy.com.au or call Filip on 0490 101 266.
SEND YOUR PLANS OR FLOOR SCOPE
Provide the site, approximate area, existing surface and required handover condition for project-specific pricing.
