Glue & Adhesive Removal

Commercial Glue & Adhesive Removal in Sydney

Resin Me Epoxy mechanically removes carpet glue, vinyl adhesive, mastic and timber-flooring residues from concrete for commercial refurbishments, make-good works and new flooring installations across Sydney.

Adhesives vary widely. Soft or heat-sensitive glue can smear and load ordinary diamonds, while brittle residues may fracture more readily. We inspect the bond, thickness, previous floor covering and slab hardness before selecting PCD scrapers, specialised segments or staged diamond grinding.

Commercial grinders are connected to H-Class dust extraction and edges are detailed with suitable hand equipment. This controls airborne dust but does not make the process completely dust-free. Sticky adhesive may generate heat or odour and can require slower passes or tooling changes.

Removal may reveal staining, cracks, levelling compound or adhesive sitting deep in the concrete pores. We work to the agreed preparation standard, but do not promise a perfectly clean, unmarked or level slab. Suitability is judged against the flooring or coating system that follows.

For an accurate quote, provide the floor area, previous floor covering, adhesive type if known, site photos, access and lift limits, available power, occupied-area restrictions and programme. See our Windsor school glue-removal project for a restricted-access example, or our 100 m² private gym preparation project for a smaller adhesive-removal scope.

Scope to confirm in your quotation

• Assessment of adhesive type, thickness and bond
• PCD, specialised or diamond tooling selected for the residue
• Commercial and remote-control grinders where access permits
• H-Class dust extraction and detailed edge preparation
• Carpet, vinyl, tile and timber-flooring adhesive removal
• Access, power, noise and occupied-area controls confirmed
• Test area or staged passes where the adhesive is uncertain
• Exposed cracks and weak substrate reported
• Final vacuuming and inspection before handover
• Quote based on actual condition and the next flooring system

Our Sydney CBD floor-preparation project included the removal of approximately 1,000 m² of carpet adhesive within a 2,000 m² tenancy, followed by refinement grinding for the incoming fit-out.

Does adhesive removal include lifting the floor covering?

Tell us whether the carpet, vinyl, tiles or timber will already be lifted. Removal of the floor covering, adhesive removal and any off-site waste disposal need to be identified separately in the quotation, so the preparation-only scope is clear.

Preparation-only adhesive removal for commercial floors

We quote adhesive-removal and preparation packages for builders, flooring contractors and commercial property teams across Sydney. We assess commercial adhesive-removal scopes individually, with a focus on open floors and repeat preparation work. Each quotation identifies bulk adhesive removal, follow-up grinding, accessible edges and the handover required by the flooring installer. Send your scope for assessment.

For ongoing packages, project-specific rates may be available where repeat mobilisation, clear access and coordinated programmes improve efficiency. Send the next flooring specification and identify any staged areas through our commercial enquiry form. See our preparation-only subcontract service for the wider handover scope.